Supermicro X11SPD-F, Руководство пользователя

Страница: 80 / 116

Super X11SPD-F User's Manual
80
Maximum Read Request
Use this feature to select the Maximum Read Request size of the PCI-Express device, or
select Auto to allow the system BIOS to determine the value. The options are
Auto , 128
Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
Use this feature to select the low base address for PCI-E adapters to increase base memory.
The options are 1G, 1.5G, 1.75G,
2G
, 2.25G, and 3G.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware, is
pre-installed on the drive and may resolve errata or enable innovative functions for the drive.
The other option, AMI Native Support, is offered by the BIOS with a generic method. The
options are Vendor Defined Firmware and AMI Native Support.
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
CPU1 SLOT4 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy , and EFI.
RSC-RR1U-E16
CPU1 SLOT6 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy , and EFI.
CPU1 SLOT7 PCI-E 3.0 X8 OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled,
Legacy
, and EFI.
PCI-E 3.0 X4 OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy , and EFI.