X11DPL-i User's Manual
110
Secure Boot
Use this feature to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to configure Secure Boot variables without authentication. The options are
Standard and Custom.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are Enabled
and Disabled.
Key Management
This submenu allows the user to configure the following Key Management settings.
Vendor Keys
Provision Factory Default Keys
Select Enabled to install the default Secure-Boot keys set by the manufacturer. The op-
tions are Disabled and Enabled.
Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The
options are Yes and No.
Reset to Setup Mode
Select Yes to reset the system to the Setup Mode. The options are
Yes and No.
Export Secure Boot Variables
This feature is used to copy the NVRAM content of Secure Boot variables to a storage
device.
Enroll EFI Image
Select this feature and press <Enter> to specify an EFI (Extensible Firmware Interface)
image for the system to use when it operates in the Secure Boot mode.
Device Guard Ready
Remove 'UEFI CA' from DB
Select Yes to remove UEFI CA from the database. The options are
Yes and No.
Restore DB defaults
Select Yes to restore database variables to the manufacturer default settings. The op
-
tions are Yes and No.
Содержание X11DPL-i
Страница 1: ...USER S MANUAL Revision 1 1a X11DPL i...
