Supermicro X11DPL-i, Руководство пользователя

Страница: 90 / 127

X11DPL-i User's Manual
90

PCH sSATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chip and displays the following features:
sSATA Controller
This feature enables or disables the onboard sSATA controller supported by the Intel PCH
chip. The options are Disable and Enable.
Configure sSATA as
Select AHCI to configure an sSATA drive specified by the user as an AHCI drive. Select RAID
to configure an sSATA drive specified by the user as a RAID drive. The options are
AHCI,
and RAID.
SATA HDD Unlock
This feature allows the user to remove any password-protected SATA disk drives. The options
are Disable and Enable.
Aggressive Link Power Management
When this feature is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disabled and Enabled.
*If the feature above "Configure SATA as" is set to RAID, the following features will
become available for user's configuration:
sSATA RAID Option ROM/UEFI Driver
Use this feature to select the Raid Option ROM type The options are Diable, EFI, and
Legacy.
sSATA Port 0 ~ Port 2
This feature displays the information detected on the installed sSATA drive on the particular
sSATA port.
Port 0 ~ Port 2 Hot Plug
Set this feature to Enabled for hot-plugging support, which will allow the user to replace a
SATA drive without shutting down the system. The options are Disabled and Enabled.
Port 0 ~ Port 2 Spin Up Device
On an edge detect from 0 to 1, set this feature to allow the PCH to initialize the device. The
options are Disabled and Enabled.