Supermicro X10SRG-F, Руководство пользователя

Страница: 95 / 137

Chapter 4: AMI BIOS
4-23
Onboard LAN Option ROM Type
Use this item to select the Onboard LAN Option ROM type. The options are Legacy
and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system
boot. The default setting for LAN1 Option ROM is
PXE .
Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port2 used for system
boot. The default setting for LAN2 Option ROM is
Disabled .
Load Onboard SAS Option ROM
Use this option to enable or disable
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are
Legacy and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
at bootup. The options are
Onboard and Offboard.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Use this feature to enable Ipv4 PXE Boot Support. If this feature is disabled, it
will not create the Ipv4 PXE Boot option. The options are Disabled and
Enabled .
Ipv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it
will not create the Ipv6 PXE Boot option. The options are Disabled and
Enabled .
PXE Boot Wait Time
Use this feature to select the wait time to press the ESC key to abort the PXE
boot. The default is 0.