Supermicro X10SRG-F, Руководство пользователя

Страница: 48 / 137

2-20
X10SRG-F Motherboard User’s Manual
Power Button
OH/Fan Fail LED
1
NIC1 LED
Reset Button
2
Power Fail LED
HDD LED
Power LED
Reset
PWR
P3V3
UID SW
P3V3_STB
UID LED
Ground
Ground
19 20
P3V3
X
Ground
NMI
X
P3V3_STB
NIC2 LED
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Control-
ler) LED connection for LAN port 1
is located on pins 11 and 12 of JF1,
and the LED connection for LAN Port
2 is on Pins 9 and 10. NIC1 LED and
NIC2 LED are 2-pin NIC LED head-
ers. Attach NIC LED cables to NIC1
and NIC2 LED indicators to display
network activity. Refer to the table on
the right for pin definitions.
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9/11 Vcc
10/12 Ground
C
A. NIC1 LED
B. NIC2 LED
C. OH/Fan Fail/UID LED
OH/Fan Fail/Blue UID
LED Pin Definitions (JF1)
Pin# Definition
7 Blue UID LED
8 Red_LED-Cathode/OH/Fan Fail
OH/Fan Fail
LED Status (Red LED)
State Definition
Off Normal
On Overheat
Flashing
1 Hz
Fan Fail
A
B
Overheat (OH)/Fan Fail/Unit ID
LED
Connect an LED cable to pins 7 and 8
of the Front Control Panel to use the
Unit ID LED, Overheat, and Fan Fail.
Refer to the table on the right for pin
definitions.
NIC LED
Status
State Definition
Off No Activity
Blinking NIC Busy
Blue UID LED
Status
State Definition
Off UID Off
On UID On