Supermicro X10SRG-F, Руководство пользователя

Страница: 93 / 137

Chapter 4: AMI BIOS
4-21
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code

PCIe/PCI/PnP Configuration
The following PCI information will be displayed:
•
PCI Bus Driver Version
•
PCI Devices Common Settings:
PCI Latency Timer
Use this feature to set the latency timer for each PCI device installed on a PCI bus.
Select 32 to set the PCI latency to 32. The options are
32 , 64, 96, 128, 160, 192,
224 and 248 PCI Bus Clocks.
PCI-X Latency Timer
Use this feature to set the latency timer for each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64. The options are 32,
64 , 96, 128, 160, 192,
224 and 248 PCI Bus Clocks.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR (PCI/PCI-E Parity Error)
number for a PCI bus error event. The options are Enabled and
Disabled .
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR (System Error) number
for a PCI bus error event. The options are Enabled and
Disabled .
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options
are
Disabled and Enabled.
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are
Enabled and Disabled.