Supermicro x10qbi, Руководство пользователя

Страница: 45 / 127

Chapter 2: Installation
2-17
Note 1 : For the memory modules to work properly, please install DIMM modules
of the same type, same speed and same operating frequency in the mother-
board. Mixing of DIMMs of different types or different speeds is not allowed.
Note 2 : For detailed information on memory support and updates, please refer
to the SMC Recommended Memory List on our website at http://supermicro.com/
support/resources/mem.cfm.
Note 3
: Please refer to pages 1-6 to 1-9 in Chapter 1 for details on the MEM1
and MEM2 memory cards.
DDR3 ECC RDIMM/LRDIMM (2:1) (for X10QBi-MEM1 R. 1.01)
Type
Ranks Per DIMM and
Data Width (x8 is
supported but not
listed)
SR Single Rank
DR Dual Rank
QR Quad Rank
Max DIMM
Capacity (GB)
Max Speed (GHz) ; Voltage (V);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
2 SPC 3 SPC
1DPC 2DPC 1DPC 2DPC 3DPC
2Gb 4Gb 1.5V 1.35V
1.5V
1.35V 1.5V 1.35V 1.5V 1.35V 1.5V 1.35V
RDIMM SRx4 4GB 8GB
1600
1333 1600 1333 1333 1333 1333 1066 1066
N/A
RDIMM DRx4 8GB 16GB 1600 1333 1600 1333 1333 1333 1333 1066 1066 N/A
RDIMM QRx4 16GB 32GB 1066 1066 1066 1066 1066 1066 N/A N/A N/A N/A
LRDIMM QRx4 16GB 32GB
1600 1333 1600 1333 1600 1333 1600 1333 1333
N/A
LRDIMM (QDP,
RM = 2)
8Rx4 32GB 64GB 1066 N/A 1066 N/A 1066 N/A 1066 N/A 1066 N/A
Haswell-EX Performance Mode (2:1) - DDR3 RDIMM + LRDIMM Configuration
1
Type
Ranks Per DIMM and
Data Width (x8 is
supported but not
listed)
Max DIMM
Capacity (GB)
Max Speed (MT/s) ; Voltage (V);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
2 SPC 3 SPC
1DPC 2DPC 1DPC 2DPC 3DPC
2Gb 4Gb 1.5V 1.35V 1.5V 1.35V 1.5V 1.35V 1.5V 1.35V 1.5V 1.35V
RDIMM SRx4 4GB 8GB 1600 1333 1600 1333 1333 1333 1333 1066 1066 N/A
RDIMM DRx4 8GB 16GB 1600 1333 1600 1333 1333 1333 1333 1066 1066 N/A
RDIMM QRx4 16GB 32GB 1066 1066 1066 1066 1066 1066 N/A N/A N/A N/A
LRDIMM QRx4 16GB 32GB 1600 1333 1600 1333 1600 1333 1600 1333 1333 N/A
LRDIMM (QDP,
RM = 2)
8Rx4 32GB 64GB 1066 N/A 1066 N/A 1066 N/A 1066 N/A 1066 N/A
2
Haswell-EX Lockstep Mode (1:1) - DDR3 RDIMM + LRDIMM Configuration
Memory Support for the X10QBi-MEM1 Rev. 1.01 Card
DDR3 ECC RDIMM/LRDIMM (1:1) (for X10QBi-MEM1 R. 1.01)