Chapter 2: Installation
2-13
JBA
T1 FANB
FANA
FAN2
FAN1
FAN3
FAN4
JBT1
LED2
LED1
LEDM1
SP1
JI2C1
JWD1
JPB1
JI2C2
JPG1
JPL1
JVR1
JTPM1
JSTBY1
JL1
JP1
JF1
JPWR3
JPWR2
JPI2C1
S-SA
TA0
S-SA
TA2
S-SA
TA1
S-SA
TA3
I-SA
TA5(SuperDOM)
I-SA
TA2
I-SA
TA3
I-SA
TA0
I-SA
TA1
JPWR1
JIPMB1
S-SGPIO
I-SGPIO1
P1_NVME0
P1_NVME1
SAN MAC
IPMI CODE
BIOS
LICENSE
MAC CODE
X10DRW-E/T/N/NT
BAR CODE
AL
W
AYS POPULA
TE DIMMx1 FIRST
AL
W
AYS POPULA
TE DIMMx1 FIRST
COM1
VGA
USB0/1
IPMI_LAN
USB2/3
LAN1
LAN2
UID-SW
SXB1A
SXB1B:CPU1 PCI-E 3.0X16+CPU2 PCI-E 3.0X16
P2-DIMMG1
P2-DIMMH2
P2-DIMMG2
P2-DIMMH1
P1-DIMMB2 P1-DIMMB1 P1-DIMMA2 P1-DIMMA1
P1-DIMMD1
P1-DIMMC2
P1-DIMMC1
P1-DIMMD2
P2-DIMME1 P2-DIMME2 P2-DIMMF1 P2-DIMMF2
SXB1C
USB4/5(3.0)
Rev. 1.01A
LAN CTRL
BMC
PCH
BIOS
CPU1
CPU2
1
JVRM1
JVRM2
I-SGPIO2
JPME2
I-SA
TA4(SuperDOM)
1
Release Tabs
Notches
2-5 Installing and Removing the Memory Modules
Note
: Check Supermicro's website for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
Installing & Removing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with
P1-DIMM A1. (For best performance, please use the memory modules of the
same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
Removing Memory Modules
Press both notches on the ends of the DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the memory slot.
3. Align the key of the DIMM module with the receptive point on the memory
slot.
4. Align the notches on both ends of the module against the receptive points on
the ends of the slot.
5. Use two thumbs together to press the notches on both ends of the module
straight down into the slot until the module snaps into place.
6. Press the release tabs to the locking positions to secure the DIMM module
into the slot.
Press both notches straight
down into the memory slot at
the same time.
