1-8
X10DRW-E/ET/N/NT Motherboard User’s Manual
IPMI 2.0
•
IPMI 2.0 supported by ASpeed AST 2400
Serial (COM) Port Header
•
One (1) COM port header for front access
Peripheral
Devices
USB Devices
•
Four (4) USB 2.0 ports on the I/O back panel (USB
2.0 0/1, 2/3)
•
One (1) internal USB 3.0 header supports two USB
3.0 connections (USB 4/5)
BIOS
•
16 MB SPI AMI BIOS
®
SM Flash UEFI BIOS
•
APCI 2.3, ACPI 2.0/3.0/4.0, USB Keyboard, Plug &
Play (PnP) and SMBIOS 2.7 or above
Power
•
ACPI Power Management
Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager 3.0 (Available
when the Supermicro Power Manager [SPM] is in-
stalled and special power supply used. See the note
on Page 1-14.)
•
Management Engine (ME)
System
Health
System Health/CPU Monitoring
Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V Standby,
+5V, +5V Standby, +12V, CPU core, memory, chipset,
BMC, and battery voltages
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for On/Off control
•
CPU Thermal Design Power (TDP): support up to
145W (See Note 1 on the next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan control
