Chapter 1: Overview
1-5
X10DRW-E/ET/N/NT Jumpers
Jumper
Description
Default Setting
JBT1
Clear CMOS/Reset BIOS Configuration
See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots
Pins 2-3 (Disabled)
JPB1
BMC Enable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1
GLAN1/GLAN2 Enable (for X10DRW-E/N)
10G-LAN1/ 10G-LAN1 Enable (for X10DRW-
ET/NT)
Pins 1-2 (Enabled)
JPME2
ME Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Timer Enable
Pins 1-2 (Reset)
X10DRW-E/ET/N/NT Connectors
Connectors
Description
Battery (JBAT1)
Onboard CMOS battery (See Chapter 3 for Used Battery Dis-
posal)
COM1
COM header
Fan1-4, A, B
System cooling fan headers (Page 1-8)
JF1
Front Panel Control header
JIPMB1
4-pin External BMC I
2
C header
JL1
Chassis Intrusion header
JPI
2
C1
Power Supply SMBbus I
2
C header
JPWR1
24-pin ATX main power connector (See Warning on Page 1-6.)
JPWR2/3
12V 8-Pin power connectors (See Warning on Page 1-6.)
JSTBY1
Standby Power connector
JTPM1
TPM (Trusted Platform Module)/Port 80 header
LAN1/LAN2
Gigabit Ethernet (GLAN) Port 1/Port 2 (for X10DRW-E/N)
10G-LAN (TLAN) Port 1/Port 2 (for X10DRW-ET/NT)
IPMI_LAN
IPMI_Dedicated LAN support by the ASpeed controller
P1_NVME0/1
NVM Express PCI-Express 3.0 x4 ports 0/1 (from CPU1) (For
X10DRW-N/NT)
I-SATA 0-3
Intel SATA 3.0 ports 0-3
I-SATA 4/5
Intel SATA 3.0 ports 4/5 w/SuperDOMs (SATA DOMs with pow-
er built in) support
S-SATA 0-3
S-SATA 3.0 connectors 0-3 from Intel SCU
S-SGPIO
Serial_Link General Purpose I/O header 1 for S-SATA connec-
tions 0-3
I-SGPIO1/2
(SATA-SGPIO1/2)
Serial_Link General Purpose I/O headers 1/2 for SATA con-
nections (I-SGPIO1: for I-SATA0-3, I-SGPIO2: for I-SATA4/5)
SP1
Internal Speaker/Buzzer
