Supermicro Superserver, Руководство пользователя

Страница: 42 / 160

SuperServer 2029P-TXRT User's Manual
42
Installing Expansion Cards
The 2029P-TXRT system includes eleven slots for expansion cards. The serverboard must
be installed before expansion cards.
Installing an Expansion Card for an LP Model Chassis
1. Power down the system and remove the cover.
2. Begin by removing the shield for the PCI slot you wish to populate. Make sure that the
card you are installing is supported by the slot (see the table below).
3. In the rear of the chassis, remove the blank PCI shield that is pre-installed covering the
expansion slot.
4. Slide the expansion card into the expansion slot on the serverboard while aligning it with
the chassis slot in the rear of the chassis.
5. Secure the expansion card shield onto the rear of the chassis with a screw.
Figure 3-11. Removing a Blank PCI Shield
Expansion Card
Chassis Slots
PCI-E Slot
Processor
Connection
Link Width Slot Width BIOS Setting
Slot1 CPU1 x8 x8 (open-ended)
Configure the option IOU0 (IIO PCI-E Br1) in CPU1 Configuration.
Slot2 CPU1 x8 or x16 x16
Slot3 CPU1 x8 x8 (open-ended)
Slot4 CPU1 x16 x16
Slot5 CPU2 x8 x8 (open-ended)
Configure the option IOU0 (IIO PCI-E Br1) in CPU2 Configuration.
Slot6 CPU2 x8 or x16 x16
Slot7 CPU1 x8 x8 (open-ended)
Slot8 CPU2 x16 x16
Slot9 CPU2 x8 x8 (open-ended)
Slot10 CPU2 x8 x8 (open-ended)
Slot11 CPU2 x4 x8