18
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS clear
Open (Normal)
JPL1
LAN Enable/Disable
Pins 1-2 (Enabled)
JPME1
ME manufacturing recovery
Pins 1-2 (Normal)
LED
Description
Status
LE3
Power LED
LED On: Onboard Power On
LE4
M.2 LED
Blinking Green: Device Working
LE6
Unit Identifier (UID) LED
Solid Blue: Unit Identified
LEDM1
BMC heartbeat LED
Blinking Green: BMC Normal (Active),
Solid Green: (During BMC Reset or during a Cold Reboot)
Connector
Description
Battery (BT1)
Onboard battery
COM1
Rear I/O COM port
COM2
Front accessible COM port header
FAN1 - FAN6, FANA, FANB
CPU/System fan headers
BMC_LAN
Dedicated BMC LAN port
JF1
Front control panel header
JIPMB1
4-pin BMC external I
2
C header
JL1
Chassis intrusion header
JNCSI
NC-SI (Network Controller Sideband Interface) connector (see Note below)
JNVI
2
C
NVMe I
2
C header
JPI
2
C1
Power System Management Bus (SMB) I
2
C header
JPWR2/JPWR4
8-pin power connectors
JPWR3
24-pin ATX power connector
JSTBY1
Standby power header
JTPM1
Trusted Platform Module/Port 80 connector
LAN1, LAN2
Ethernet LAN (RJ45) Port 1/ Port 2 (1G LAN support on X12DPi-N6 and 10G LAN support
on X12DPi-NT6)
M.2
PCIe 4.0 x4 M.2 slot (with support of M-Key 2280, and 22110)
MH15, MH16
Mounting holes for M.2 keys (MH15: for M.2 Key 2280, MH16: for M.2 Key 22110)
P1_DIMMB2, P2_DIMMB2
Two dedicated PMem slots
P1_NVME0/1, P1_NVME2/3
PCIe 4.0 x8 SlimSAS ports with support of four NVMe connections (0/1, 2/3)
I-SATA 0-3, I-SATA 4-7
Intel® PCH SATA 3.0 ports (with RAID 0, 1, 5, 10)
S-SATA 0-3
Intel® PCH S-SATA 3.0 ports (with RAID 0, 1, 5, 10)
S-SATA4/S-SATA5
Intel PCH powered S-SATA 3.0 ports with support for SuperDOM (Disk on Module) devices
SLOT1
PCIe 4.0 x8 slot supported by CPU1
SLOT2/SLOT3
PCIe 4.0 x16 slots supported by CPU1
SLOT4, SLOT5
PCIe 4.0 x16 slots supported by CPU2
