9
Chapter 1: Introduction
1.3 Chassis Features
The SCE300-LED is a compact embedded 1U chassis.
Front Features
The front of the chassis includes the control panel.
Information LED
Status
Description
Continuously on and red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power supply.
Solid blue
UID has been activated locally to locate the server in a rack environment.
Blinking blue
UID has been activated using IPMI to locate the server in a rack
environment.
1
5
4
3
Figure 1-1. Chassis Front and Control Panel
Control Panel Features
Item
Features
Description
1
Power button
The main power button applies or removes primary power from the power supply
to the server but maintains standby power. To perform most maintenance tasks,
unplug the system to remove all power.
2
Reset button
Resets the system.
3
Information LED Alerts operator to several states, as noted in the table below.
4
HDD LED
Indicates hard disk drive activity when flashing.
5
Power LED
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
2
