70
SuperServer E300-9A-8CN8 User's Manual
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are
Do Nothing
and Erase Immediately.
Note
: All values here that have been changed do not take effect until the computer is
restarted in the BIOS setup menu.
BMC Network Configuration
The following features will be displayed:
IPMI LAN Selection
This feature displays the IPMI LAN setting. The default setting is
Failover
.
IPMI Network Link Status:
This feature displays the IPMI Network Link status. The default setting is
Shared LAN
.
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are
No
and Yes.
*If the feature above is set to Yes, Configuration Address Source and VLAN will
become available for configuration:
Configuration Address Source
Use this feature to select the source of the IP address for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system manually in
the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server in the network that is attached to and request the next available IP address
for this computer. The options are
DHCP
and Static.
The following features are assigned IP addresses automatically if DHCP is selected, or
they can be configured manually if Static is selected.
Station IP Address
This feature displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This feature displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
