Supermicro SUPERSERVER 9029GP-TNVRT Скачать руководство пользователя страница 48

Страница: 48 / 145

SuperServer 9029GP-TNVRT User's Manual

Storage Drives

The system supports sixteen NVMe 2.5" storage drives in the front and eight SATA 2.5"

storage drives in the rear. If RAID is configured, these drives can be removed or replaced

without powering down the system.
In addition the system features two internal M.2 SSDs.

Note:

Enterprise level drives are recommended for use in Supermicro servers. For information

http://www.supermicro.com/products/

nfo/files/storage/SBB-HDDCompList.pdf

Drive Carriers

The drives are mounted in drive carriers that simplify their removal from the chassis. These

carriers also help promote proper airflow. Even carriers without drives must remain in the
chassis for proper airflow.

Each drive carrier has two LED indicators: an activity indicator and a status indicator. In

RAID configurations, the status indicator lights to indicate the status of the drive. In non-RAID
configurations, the status indicator remains off. See the table below for details.

Drive Carrier LED Indicators

Color

Blinking Pattern

Behavior for Device

Activity

LED

Blue

Solid On

SAS/NVMe drive installed

Blue

Blinking

I/O activity

Status

LED

Red

Solid On

Failure of drive with RSTe support

Red

Blinking at 1 Hz

Rebuild drive with RSTe support

Red

Blinking with two blinks

and one stop at 1 Hz

Hot spare for drive with RSTe support

(not supported in VMD mode)

Red

On for five seconds,

then off

Power on for drive with RSTe support

Red

Blinking at 4 Hz

Identify drive with RSTe support

Green

Solid On

Safe to remove NVMe device

(not supported in VMD mode)

Amber

Blinking at 1 Hz

Attention state—do not remove NVMe device

(not supported in VMD mode)

Содержание SUPERSERVER 9029GP-TNVRT


















































































































































Результаты поиска

Содержание SUPERSERVER 9029GP-TNVRT

Отзывы:

Supermicro SUPERSERVER 9029GP-TNVRT, Руководство пользователя, Страница: 48 / 145

Результаты поиска

Содержание SUPERSERVER 9029GP-TNVRT

Отзывы: