Supermicro SUPERSERVER 8045C-3R, Руководство пользователя

Страница: 19 / 118

Chapter 2: Server Installation
2-5
Installing the Chassis Rails
Removing the Chassis Covers and Feet
Remove the top and right covers (top and left covers when standing as a
tower chassis) by depressing the latch on the rear lip of the top (side if tower)
cover to release it - then push the cover off.
Unscrew the four feet and remove them from the chassis (see Figure 2-2).
Attaching the Rails
Position the inner chassis rail sections you previously removed along the side
of the chassis making sure the screw holes line up. Note: these two rails are
left/right specifi c.
Screw the rail securely to the side of the chassis (see Figure 2-3).
Repeat this procedure for the other rail on the other side of the chassis.
Locking Tabs: The chassis rails have locking tabs that serve to lock the server into
place when installed and pushed fully into the rack, which is its normal position.
1.
2.
1.
2.
3.
Figure 2-2. Preparing to Install the Chassis Rails