Supermicro SUPERSERVER 8045C-3R, Руководство пользователя

Страница: 107 / 118

Appendix C: Intel HostRAID Setup Guidelines
C-3
Using the Intel ESB2 SATA RAID Utility Program
Creating, Deleting and Resetting RAID Volumes:
After the system exits from the BIOS Setup Utility, the system will automati-
cally reboot. The following screen appears after Power-On Self Test.
1.
Note : All graphics and screen shots shown in the manual are for reference only.
The screen shots shown in the manual do not imply Supermicro's endorsement or
non-endorsement on any 3rd party's product.
Scroll down to "SATA RAID Enabled" and press <Enter>. Then, select "En-
abled."
Scroll down to "Exit". Select "Save and Exit" from the "Exit" menu. Press the
<Enter> key to save the changes and exit the BIOS.
Once you've exited the BIOS Utility, the system will re-boot.
During the system boot-up, press the <Ctrl> and <I> keys simultaneously
to run the Intel RAID Confi guration Utility when prompted by the following
message: Press <Ctrl> <I> for the Intel RAID Confi guration Utility . Note: The
Intel RAID Confi guration Utility is only available for systems with two or more
drives installed. The Intel RAID Utility screen will not display in systems with
one drive installed.
5.
6.
7.
8.
When you see the above screen, press the <Ctrl> and the <I> keys simulta-
neously to have the main menu of the SATA RAID Utility appear:
2.