Supermicro SuperServer 8028B-C0R3FT, Руководство пользователя

Страница: 139 / 142

B-1
Appendix B: System Specifications
Appendix B
System Specifications
Processors
Quad Intel E7-8800 v3 or E7-4800 v3 Series series (Socket R1 type) processors
Note: You must install at least two processors for full functions to be supported.
Note: Please refer to our web site for a complete listing of supported processors.
Chipset
One Intel C602J chipset
BIOS
16 MB SPI AMI BIOS® SM Flash BIOS
Memory Capacity
The X10QBL-(CT) serverboard supports thirty-two (32) 240-pin DIMM sockets that can
support up to 1 TB of Registered (RDIMM) or up to 2 TB of Load Reduced (LRDIMM)
ECC DDR3 1600/1333/1066 MHz speed SDRAM in a two-channel memory bus with
memory sizes of 4GB, 8GB, 16GB, 32GB and 64GB size @ 1.35V/1.5V voltages.
SAS/SATA Controller
Intel C602J on-chip controller for six-port SATA subsystem (two SATA 3.0 and
four SATA 2.0 ports), which is RAID 0, 1, 5 and 10 Windows/LINUX supported.
The SATA drives are hot-swappable units.
A LSI 3008 SAS controller is integrated into the X10QBL-CT serverboard
to provide an eight port SAS (Serial Attached SCSI) subsystem, which is
RAID 0, 1, 1E and JBOD supported (8028B-C0R3FT server only). The SAS drives
are hot-swappable units.
Drive Bays
The SuperServer 8028B-TR3F/C0R3FT has six (6) hot-swap drive bays to house
up to six SATA or SAS drives.
Expansion Slots
Four PCI low-profile expansion card slots are available in the rear of the
chassis for two (2) PCI-E 3.0 x16 slots (CPU1 Slot1, CPU2 Slot3) and
two (2) PCI-E 3.0 x8 slots (CPU2 Slot2, CPU2 Slot4)