Supermicro SUPERSERVER 6021i, Руководство пользователя

Страница: 80 / 110

7-12
S
UPER
S
ERVER
6021i
Manual
Onboard FDC Controller
Select "Enabled" if your system has a floppy disk controller (FDC) installed
on the main board and you wish to use it. The settings are " Enabled " and
"Disabled".
Onboard Serial Port 1 / Port 2
This option allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The settings are "Disabled" , "3F8/
IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3" and "Auto ." The default setting
for Serial Port1 is "3F8/IRQ4" and the default for Port 2 is is "2F8/IRQ3".
UART Mode Select
This option allows the user to select the UART mode for BIOS. The settings
are "IrDA", "ASKIR" and " Normal ".
RxD, TxD Active
This option allows the user to set the settings for the function of "RxD, TxD
Active." The settings are "Hi, Hi", " Hi, Lo ", "Lo, Hi" and "Lo, Lo".
When the item "Integrated Peripherals" is highlighted, hit the <Enter> key to
activate the sub-menu screen. When the above menu appears, select the
items and press the <Enter> key to display the options.
7-4.3 Integrated Peripherals