Supermicro SUPERSERVER 6021i, Руководство пользователя

Страница: 40 / 110

5-6
S
UPERSERVER 6021i User’s Manual
Figure 5-3. FCPGA Socket: Empty and with Processor Installed
(Low Power Pentium III shown)
2. Attaching heat sinks to the processors:
Two passive heat sinks (one for each processor) have been included
with your SuperServer 6021i. Secure a heat sink to each processor with
a suitable thermal compound to conduct the heat from the processor to
the heat sink in the best manner. Make certain that you apply the
compound evenly and that good contact is made between the CPU chip
(the die) and the heat sink. Insufficient contact or improper types of heat
sinks and thermal compounds can cause the processor to overheat,
which may crash the system. See figure 5-4 for heat sink installation
diagrams.
3. Removing the processors:
To remove the processors from the motherboard, simply follow the
installation process in reverse order.