Supermicro SUPERSERVER 6021i, Руководство пользователя

Страница: 32 / 110

S
UPER
S
ERVER
6021i
Manual
4-2
4-2 General Safety Precautions
Follow these rules to ensure general safety:
!
Keep the area around the SuperServer 6021i clean and free of
clutter.
!
The SuperServer 6021i weighs approximately 54 lbs (24.2 kg) when
fully loaded. When lifting the system, two people at either end
should lift slowly with their feet spread out to distribute the weight.
Always keep your back straight and lift with your legs.
!
Place the chassis top cover and any system components that have
been removed away from the system or on a table so that they
won't accidentally be stepped on.
!
While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
!
Remove any jewelry or metal objects from your body, which are
excellent metal conductors that can create short circuits and harm
you if they come into contact with printed circuit boards or areas
where power is present.
!
After accessing the inside of the system, close the system back up
and secure it to the rack unit with the retention screws after
ensuring that all connections have been made.
!
!
Motherboard Battery: CAUTION - There is a danger of explosion if the
onboard battery (located near the IDE#1 connector) is installed upside
down, which will reverse its polarities. This battery must be replaced
only with the same or an equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
!
CD-ROM Laser: CAUTION - this server may have come equipped with a
CD-ROM drive. To prevent direct exposure to the laser beam and
hazardous radiation exposure, do not open the enclosure or use the
unit in any unconventional way.