10
SuperServer 6019P-MT/MTR User's Manual
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
Control Panel Features
Item
Feature
Description
1
Information LED
See table below for details.
2
NIC2 LED
Indicates network activity on LAN port 2 when flashing
3
NIC1 LED
Indicates network activity on LAN port 1 when flashing
4
HDD LED
Indicates activity on the hard drive when flashing.
5
Power LED
Indicates power is being supplied to the system's power supply unit. This LED
should normally be illuminated when the system is operating.
6
Reset Button
The reset button is used to reboot the system.
7
Power Button
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing.
Figure 1-1. Control Panel View
Information LED
Status
Description
Continuously on and red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Solid blue
Local UID has been activated. Use this function to
locate the server in a rackmount environment.
Blinking blue
Remote UID is on. Use this function to identify the
server from a remote location.
1
7
6
5
4
3
2
