
Chapter 5: Advanced Serverboard Setup
5-7
5-6
S
UPER
S
ERVER 6018R-TDTP/TDTPR User's Manual
5-3 Connecting Cables
Now that the processors are installed, the next step is to connect the cables to the
serverboard. These include the data (ribbon) cables for the peripherals and control
panel and the power cables.
Connecting Data Cables
The cables used to transfer data from the peripheral devices have been carefully
routed in preconfigured systems to prevent them from blocking the flow of cooling
air that moves through the system from front to back.
If you need to disconnect any of these cables, you should take care to reroute them
as they were originally after reconnecting them (be aware of the pin 1 locations). If
you are configuring the system, keep the airflow in mind when routing the cables.
Connecting Power Cables
The X10DRD-LTP has a 24-pin primary power supply connector designated
"JPWR1" for connection to the ATX power supply. Connect the appropriate con-
nector from the power supply to JPW1 to supply power to the serverboard. See the
Connector Definitions section in this chapter for power connector pin definitions.
In addition, your power supply must be connected to the 8-pin Processor Power
connectors at JPWR2 and JPWR3.
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See Figure
5-2 for the pin locations of the various front control panel buttons and LED indica-
tors. Please note that even and odd numbered pins are on opposite sides of each
header.All JF1 wires have been bundled into single keyed ribbon cable to simplify
their connection. Connect one end of this cable to JF1 and the other end to the
Control Panel printed circuit board, located just behind the system status LEDs in
the chassis.
See the Connector Definitions section in this chapter for details and pin descrip
-
tions of JF1.
Figure 5-2. Front Control Panel Header Pins (JF1)
5-4 I/O Ports
See Figure 5-3 below for the descriptions of the various I/O ports.
Figure 5-3. Rear Panel I/O Ports
1
2
3
4
5
6
7
8
9
1
10
Backplane I/O Ports
1. COM Port
6. USB 2.0 Port
2. USB 2.0 Port
7. 10 Gb SFP+ LAN Port 1
3. USB 2.0 Port
8. 10 Gb SFP+ LAN Port 2
4. Dedicated IPMI LAN Port 9. VGA Port
5. USB 2.0 Port
10. UID Button/LED
1
2
Ground
19
20
NMI
X
X
FP PWRLED
3.3 V
HDD LED
UID Switch
NIC1 Link LED
NIC1 Activity LED
NIC2 Link LED
NIC2 Activity LED
UID LED
OH/Fan Fail/
PWR Fail LED)
Power Fail LED
3.3V
Reset Button
Power Button
Ground
Ground
Содержание SUPERSERVER 6018R-TDTP
