10
Chapter 1: Introduction
Control Panel Features
Feature
Description
Information LED Alerts operator to several states, as noted in the table below
NIC2 LED
Indicates network activity on LAN port 2 when flashing
NIC1 LED
Indicates network activity on LAN port 1 when flashing
HDD LED
Indicates hard drive activity when flashing
Power LED
Indicates power is being supplied to the system power supply; illuminated when the system is
operating normally
Reset Button
Reboots the system
Power Button
Applies or removes power from the power supply to the server; standby power is maintained
Information LED
Status
Description
Continuously on and red An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power supply.
Solid blue
UID has been activated locally to locate the server in a
rack environment.
Blinking blue
UID has been activated using IPMI to locate the server in
a rack environment.
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Figure 1-2. Control Panel
Information LED
NIC1
LED
HDD
LED
Power Button
Power
LED
Reset Button
NIC2
LED
