Supermicro SuperServer 5039MS-H8TRF, Руководство пользователя

Страница: 37 / 121

37
Chapter 3: Maintenance and Component Installation
To remove a DIMM module, unlock the release tabs then pull the module from the slot.
Caution: Exercise caution when installing or removing memory modules to prevent damage
to the DIMMs or slots.
Note:
Visit the product page on the Supermicro website for possible updates to memory
support ( www.supermicro.com ).
Release Tabs
Notches
Press both notches straight
down into the memory slot.
Install Procedure
Installing Memory
1. Remove power from the system as described in Section 3.1.
2. Starting with P1-DIMMA1, push the
release tabs outwards on both ends of
the DIMM slot to unlock it.
3. Align the key of the DIMM with the
receptive point on the memory slot and
with your thumbs on both ends of the
module, press it straight down into the
slot until the module snaps into place.
4. Press the release tabs to the locked position to secure the DIMM module into the slot.
5. Repeat the procedure for the remaining DIMM modules in the order detailed in the
previous section.