Supermicro SuperServer 5039MS-H8TRF, Руководство пользователя

Страница: 29 / 121

29
Chapter 3: Maintenance and Component Installation
Figure 3-3. Removing a Node
Removing Nodes from the System
1. Power-down the individual node by pressing that node's power button.
2. Press and hold down the release tab on the front of the node.
3. Use the node handle to pull the node from the system.
Caution: Except for short periods of time while swapping nodes, do not operate the server
with the node bays empty. In the unlikely event of a node failure, remove the failed node and
replace it with the dummy node that was included with the system.
Release Tab
Node Power Button
Node Handle