15
14
SuperServer 5019P-MT/MTR User's Manual
Chapter 1: Introduction
Notes:
•
See Chapter 2 for detailed information on jumpers, I/O ports, and JF1 front panel connec
-
tions.
•
" " indicates the location of Pin 1.
•
Jumpers/LED indicators not indicated are used for testing only.
•
Use only the correct type of onboard CMOS battery as specified by the manufacturer. Do
not install the onboard battery upside down to avoid possible explosion.
Quick Reference Table
Jumper
Description
Default Setting
JBT1
Clear CMOS
Open (Normal)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPTG1
LAN Enable/Disable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Enable
Pins 1-2 (Reset)
LED
Description
Status
LE3
PCI-E 3.0 M.2 LED
Green Blinking: Device Working
LEDBMC
BMC Heartbeat LED
Green Blinking: BMC Normal
LEDPWR
Onboard Power LED
Green Solid On: Power On
UID LED
Rear UID LED
Blue On: Unit identified
Connector
Description
BT1
Onboard Battery
COM1/COM2
COM Port/COM Header
FAN1 ~ FAN5, FANA/FANB
CPU/System Fan Headers
IPMI LAN
Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA7
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SGPIO1/I-SGPIO2/S-SGPIO1
Serial Link General Purpose I/O Connection Headers (I-SGPIO: SATA use; S-SGPIO: sSATA
use)
JD1
Speaker/Power LED Indicator (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1
Front Control Panel Header
JIPMB1
4-pin BMC External I
2
C Header (for an IPMI card)
JL1
Chassis Intrusion Header
JNVI
2
C1
NVMe I
2
C Header
JOH1
Overheat LED Indicator
JPI
2
C1
Power I
2
C System Management Bus (SMB) Header
JPWR1
8-pin Power Connector
Connector
Description
JPWR2
24-pin ATX Power Connector
JRK1
Intel RAID Key Header
JSD1/JSD2
SATA DOM Power Connectors
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
JVRM1
VRM SMBus Header (for programming use)
LAN1/LAN2
LAN (RJ45) Ports
M.2
M.2 PCI-E 3.0 X4 Slot (Supports M-Key 2280 and 22110)
MH10/MH11
M.2 Mounting Holes
SLOT1
PCH PCI-E 3.0 X4 (IN X8) Slot
SLOT2
CPU PCI-E 3.0 X8 Slot
SLOT3/SLOT4
CPU PCI-E 3.0 X8/X16 Slot (Supports Auto Switch)
SLOT6
CPU PCI-E 3.0 X16 Slot
SP1
Internal Speaker/Buzzer
S-SATA0/S-SATA1
SATA 3.0 ports with SATA DOM Power
UID SW
Unit Identifier (UID) Switch
USB0/1
Back Panel Universal Serial Bus (USB) 2.0 Ports
USB2/3, USB4/5
Front Accessible USB 2.0 Headers
USB6/7
Back Panel USB 3.0 Ports
USB8/9
Front Accessible USB 3.0 Headers
USB10
USB 3.0 Type A Header
VGA
VGA Port