Chapter 4: BIOS
SuperServer 5019P-MT/MTR User's Manual
99
98
6.6 Security
This menu allows the user to configure the following security settings for the system.
Administrator Password
Press Enter to create a new, or change an existing, Administrator password.
User Password
Press Enter to create a new, or change an existing, User password.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup
and Always.
Secure Boot
This section displays the contents of the following secure boot features:
•
System Mode
•
Secure Boot
•
Vendor Keys
Secure Boot
Use this item to enable secure boot. The options are
Disabled
and Enabled.
VLAN
This item displays the virtual LAN settings. The options are
Disable
and Enable.
Configure IPV6 Support
This section displays configuration features for IPV6 support.
LAN Channel 1
IPV6 Support
Use this feature to enable IPV6 support. The options are
Enabled
and Disabled.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available
IP address for this computer. The options are
Unspecified
, Static, and DHCP.
*If the item "Configuration Address Source" above is set to Static, the following items
will become available for configuration:
•
Station IPV6 Address
•
Prefix Length
•
IPV6 Router1 IP Address
