Supermicro SUPERSERVER 5018D-MTLN4F, Руководство пользователя

Страница: 67 / 120

Chapter 5: Advanced Motherboard Setup
5-21
LAN Port Enable/Disable
Use JPL1/JPL2 to enable or disable LAN
Ports 1 and 2 and JPL1/JPL2 to enable
or disable LAN Ports 1 and 2. See the
table on the right for jumper settings. The
default settings are enabled.
LAN Port En/Disable
Jumper Settings
Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable/Disable
JPB1 is used to enable or disable the
BMC (Baseboard Management Control)
to provide IPMI 2.0/KVM support. The
default position is on pins 1 and 2 to en-
able BMC. See the table on the right for
jumper settings.
BMC IPMI Enable/Disable
Jumper Settings
Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
PCI Slot SMB Enable/Disable
Jumper Settings
Setting Definition
Closed Enabled
Open (Default) Disabled
PCI Slot SMB Enable
Use jumpers JI
2
C1/JI
2
C2 to enable PCI
SMB (System Management Bus) support
to improve system management for the
PCI slots. Default is disabled. See the
table on the right for jumper settings.
Watch Dog Enable
Watch Dog is a system monitor that can
reboot the system when a software appli-
cation hangs. Close pins 1-2 of JWD1 to
reset the system if an application hangs.
Close pins 2-3 to generate a non-mask-
able interrupt signal for the application
that hangs. See the table on the right for
jumper settings. Watch Dog must also be
enabled in the BIOS.
Watch Dog
Jumper Settings
Setting Definition
Pins 1-2 Reset (default)
Pins 2-3 NMI
Open Disabled
BIOS Recovery
Jumper Settings
Setting Definition
Pins 1-2 Normal
Pins 2-3 Recover
BIOS Recovery (JPBIOS1)
The BIOS Recovery (JBR1) is used to
enable or disable the BIOS Recovery
feature of the motherboard. Install the
jumper on pins 1-2 to begin the recovery
process.