Chapter 2: Server Installation
25
2.3 Installing the Rails
There are a variety of rack units on the market, which may require a slightly different assembly
procedure.
This rail set fits a rack between 28" and 33.5" deep. Do not use a two post "telco"
type rack.
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the
specific rack you are using.
Installing the Rails onto a Rack
1.
Identify the left rail and right rail, as they are different.
Figure 2-1. Identifying the Left and Right Rail
2. Position the template at the front of the rack to determine the locations of the screws for
the rails.
Left
Right
Figure 2-2. Placing Template in Rack
