10
SuperServer 2029U-E Series User's Manual
Figure 1-1. Control Panel
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Control Panel Features
Item
Features
Description
1
Power button
The main power switch applies or removes primary power from the power supply to
the server but maintains standby power.
2
Reset button
Reboots the system.
3
Power LED
Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
4
NIC LED
Indicates network activity on LAN2 when flashing.
5
Power Fail LED Indicates a power supply module has failed.
6
HDD LED
Indicates activity on the hard drive when flashing.
7
NIC LED
Indicates network activity on LAN1 when flashing.
8
Information LED Alerts operator to several states, as noted in the table below
Information LED
Status
Description
Continuously on and
red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power
supply.
1
6
5
4
3
8
2
7
