Supermicro SUPERSERVER 1028R-WC1R, Руководство пользователя

Страница: 94 / 128

7-4
SUPERSERVER
1028R-WC1R(T) USER'S MANUAL
Bootup Num-Lock
Use this feature to set the Power-on state for the Numlock key. The options are
Off and On .
Wait For 'F1' If Error
If this feature is set to Enabled , the system will wait until the 'F1' key is pressed
when an error occurs. The options are Disabled and Enabled .
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles disk boot. When this item is set to
Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot up
and allow the drives that are attached to these host adaptors to function as bootable
disks. If this item is set to Disabled, the ROM BIOS of the host adaptors will not
capture Interrupt 19, and the drives attached to these adaptors will not function as
bootable devices. The options are Enabled and Disabled.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a
specifi ed boot device again after its initial boot failed. The options are Disabled ,
Legacy Boot, and EFI Boot.
Power Confi guration
Watch Dog Function
If enabled, the Watch Dog timer will reboot the system when it is not active for
more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant Off, the system will power off immediately as soon
as the user presses the power button. Select 4 Second Override for the system
to power off when the user presses the power button for 4 seconds or longer. The
options are Instant Off and 4 Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the
system power to remain off after a power loss. Select Power On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last power state before a power loss. The options are Power On, Stay
Off and Last State .