Supermicro SUPERSERVER 1028R-WC1R, Руководство пользователя

Страница: 89 / 128

Chapter 6: Advanced Chassis Setup
6-7
6-5 Power Supply
The SC116 chassis comes equipped with two redundant 700 Watt, hot-plug power
supplies. These power supplies are auto-switching capable and automatically sense
and operate at a 100v to 240v input voltage. An amber light will be illuminated on
the power supply when the power is off. An illuminated green light indicates that
the power supply is operating.
Power Supply Failure
The SC116 chassis includes a redundant power supply, which allows the server to
continue running when one power supply has been removed. Replacement units
can be ordered directly from Supermicro.
Replacing the Power Supply (Figure 6-5)
1. Unplug the AC power cord from the failed power supply module (with the
RED LED lit up).
2. Push the release tab (on the back of the power supply) as illustrated, then
pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until you hear a click
(replace with the same model).
4. Reconnect the power cord to the new module and make sure the GREEN
LED is lit up and the power supply fans are rotating..
Figure 6-5. Removing/Replacing the Power Supply
Release Tab