Supermicro SUPERSERVER 1028R-TDW Скачать руководство пользователя страница 63

Страница: 63 / 76

WIT.RU

WIT Company – поставка серверов, СХД,

сетевого оборудования, лицензионного ПО

Chapter 7: BIOS

7-25

7-24

UPER

ERVER 1028R-TDW User's Manual

Change Port 1 Settings/Change Port 2 Settings

This feature specifies the base I/O port address and the Interrupt Request address

of Serial Port 1 or Serial Port 2. Select

Auto

for the BIOS to automatically assign

the base I/O and IRQ address to a serial port specified.

The options for Serial Port 1 are

Auto

, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5,
6, 7, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12).
The options for Serial Port 2 are

Auto

, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5,

6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5,
6, 7, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7,10, 11, 12).

Serial Port 2 Attribute

Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redi-
rection. The options are COM and

SOL



Serial Port Console Redirection

COM 1

COM 1 Console Redirection

Select Enabled to enable COM Port 1 Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The
options are

Disabled

and Enabled.

*If the item above set to Enabled, the following items will become available for
configuration:



COM1 Console Redirection Settings

Terminal Type

This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to
add color and function key support. Select ANSI to use the Extended ASCII Char-
acter Set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are

ANSI, VT100,

VT100+

, and VT-UTF8.

Bits Per second

Use this item to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and

115200

(bits per second).

Data Bits

Use this feature to set the data transmission size for Console Redirection. The
options are 7 (Bits) and

8 (Bits)

Parity

A parity bit can be sent along with regular data bits to detect data transmission
errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits
is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits
is odd. Select None if you do not want to send a parity bit with your data bits
in transmission. Select Mark to add a mark as a parity bit to be sent along with
the data bits. Select Space to add a Space as a parity bit to be sent with your
data bits. The options are

None

, Even, Odd, Mark and Space.

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard
serial data communication. Select 2 Stop Bits if slower devices are used. The
options are

and 2.

Flow Control

Use this item to set the flow control for Console Redirection to prevent data
loss caused by buffer overflow. Send a "Stop" signal to stop sending data when

the receiving buffer is full. Send a "Start" signal to start sending data when the
receiving buffer is empty. The options are

None

and Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100
terminals. The options are

Enabled

and Disabled

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as text
messages to a remote server. The options are

Disabled

and Enabled.

Resolution 100x31