48
SuperServer 1019GP-TT User's Manual
Trusted Platform Module Header
Pin Definitions
Pin#
Definition
Pin#
Definition
1
+3.3V
2
SPI_CS#
3
RESET#
4
SPI_MISO
5
SPI_CLK
6
GND
7
SPI_MOSI
8
9
+3.3V Stdby 10
SPI_IRQ#
TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin definitions. Please go to the following link for more information
on TPM:
http://www.supermicro.com/manuals/other/TPM.pdf
.
SGPIO Headers
There are two Serial Link General Purpose Input/Output (S-SGPIO1) headers located on the
motherboard. I-SGPIO is for SATA use, while S-SGPIO is for sSATA use. SGPIO headers
are used to communicate with the enclosure management chip on the back panel. Refer to
the table below for pin definitions.
Disk-On-Module Power Connector
The Disk-On-Module (DOM) power connectors at JSD1 and JSD2 provide 5V power to a
solid-state DOM storage device connected to one of the SATA ports. See the table below for
pin definitions.
DOM Power
Pin Definitions
Pin#
Definition
1
5V
2
Ground
3
Ground
SGPIO Header
Pin Definitions
Pin#
Definition Pin#
Definition
1
NC
2
NC
3
Ground
4
Data
5
Load
6
Ground
7
Clock
8
NC
NC = No Connection
