45
Chapter 3: Maintenance and Component Installation
Figure 3-15. Removing the Power Supply
Figure 3-14. Removing a Fan from its Housing
Power Supply
The SC118GTS chassis includes a single 1400W power supply. TThis power supply has an
auto-switching capability, which enables it to automatically sense and operate at a 100V -
240V input voltage.
Power Supply Replacement
If the power supply unit fails, the system will shut down and you will need to replace the unit.
Replacement units can be ordered directly from Supermicro.
Replacing the Power Supply
1. If the system is still running, power down the system as described in Section 3.1.
2. Push the release tab on the front of the power supply.
3. Lift the handle of the power supply.
4. Pull the power supply out of the power supply bay.
5. Push the new power supply module into the power bay until it clicks into the locked
position.
6. Plug the AC power cord back into the module and power up the server.
4
3
2
