SuperServer 1019GP-TT User's Manual
23
1
C
1
D
Figure 2-4. Installing the Outer Rails to the Rack
Note:
Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
Warning:
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Sliding the Chassis onto the Rack Rails
Installing the Chassis into a Rack
1. Align the chassis rails with the front of the rack rails.
2. Slide the chassis rails into the rack rails, keeping the pressure even on both sides. The
spring latch engages when the chassis is part way in. Push the server completely into
the rack.
3. (Optional) Insert and tighten the thumbscrews that hold the front of the server to the
rack.
