Supermicro SuperServer 1019D-FRN8TP Скачать руководство пользователя | Manualshive

Страница: 60 / 126

background image

SuperServer 1019D-FRN8TP User's Manual

60

Power Performance Tuning

This feature allows the user to set whether the operating system or the BIOS controls
the Energy Performance BIAS (EPB). The options are

OS Controls EPB

and BIOS

Controls EPB.

*If the feature above is set to BIOS Controls EPB, the following features will be

available for configuration:

ENERGY_PERF_BIAS_CFG Mode

The Energy Perfomance BIAS (EPB) feature allows the user to configure CPU power
and perfomance settings. Select Maximum Performance to set the highest performance.
Select Performance to optimize performance over energy efficiency. Select Balanced
Perfomance to priortize performance optimization while conserving energy. Select Bal-
anced Power to prioritize energy conservation while maintaining good performance.
Select Power to optimize energy efficency over performance. The options are Maximum
Performance, Performance,

Balanced Performance,

Balanced Power, and Power.



CPU P State Control

This feature allows the user to configure the following CPU power settings:

SpeedStep (Pstates)

Intel SpeedStep Technology allows the system to automatically adjust processor volt-
age and core frequency to reduce power consumption and heat dissipation. The options
are Disable and

Enable

. If this feature is set to Disabled, the next two features are not

available for configuration.

EIST PSD Funtion

This feature allows the user to choose between Hardware and Software to control the
processor's frequency and performance (P-state). In HW_ALL mode, the processor hard-
ware is responsible for coordinating the P-state, and the OS is responsible for keeping the
P-state request up to date on all Logical Processors. In SW_ALL mode, the OS Power
Manager is responsible for coordinating the P-state, and must initiate the transition on
all Logical Processors. In SW_ANY mode, the OS Power Manager is responsible for
coordinating the P-state and may initiate the transition on any Logical Processors. The
options are

HW_ALL

, SW_ALL, and SW_ANY.

Turbo Mode

This feature will enable dynamic control of the processor, allowing it to run above stock
frequency. The options are Disable and

Enable

.

«
...
58
59
60
61
62
...
»

Содержание SuperServer 1019D-FRN8TP































































































































Отзывы:

Нет отзывов

Похожие инструкции для SuperServer 1019D-FRN8TP

DTS 4132.timeserver

Бренд: Mobatime Страницы: 108

SUPERSERVER 2048U-RTR4

Бренд: Supermicro Страницы: 152

Бренд: d3 Technologies Страницы: 10

EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренд: Edimax Страницы: 118

Бренд: Vidyo Страницы: 186

Бренд: Sun Microsystems Страницы: 12

Бренд: Brother Страницы: 103

Бренд: G-Technology Страницы: 50

Бренд: Kramer Страницы: 2

TEW-MP2U - Wireless Multi-Function Print Server

Бренд: TRENDnet Страницы: 2

Бренд: Planet Страницы: 68

Бренд: Compatible Systems Страницы: 75

PD02 PCoIP Zero Client

Бренд: EVGA Страницы: 2

PD02 PCoIP Zero Client TAA Compliant

Бренд: EVGA Страницы: 2

Бренд: Meinberg Страницы: 55

Бренд: AAxeon Страницы: 4

Бренд: Intel Страницы: 75

Бренд: Oracle Страницы: 83

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды