manualshive.com logo in svg

Supermicro SuperServer 1019D-12C-FRN5TP, Руководство пользователя

Поделиться
Скачать
Supermicro SuperServer 1019D-12C-FRN5TP Скачать руководство пользователя страница 74

SuperServer 1019D-(12C/14C/16C-)FRN5TP User's Manual

74

SATA HDD Unlock

This feature allows you to remove any password-protected SATA disk drives. The options 
are Disable and 

Enable

.

*If the feature "Configure sSATA as" above is set to RAID, sSATA RSTe Boot Into and 
sSATA RAID Option ROM/UEFI Driver are available for configuration:

sSATA RSTe Boot Info

Select Enable to provide full int13h support for the devices attached to the sSATA controller. 
The options are Disable and 

Enable

.

Aggressive Link Power Management

When this feature is set to Enable, the SATA AHCI controller manages the power usage of 
the SATA link. The controller will put the link in a low power mode during extended periods 
of I/O inactivity and will return the link to an active state when I/O activity resumes. The op-
tions are 

Disable

 and Enable.

sSATA RAID Option ROM/UEFI Driver

Select UEFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for 
system boot. The options are Disable, EFI, and 

Legacy

.

sSATA Port 2/4/5

This feature displays the information detected on the installed sSATA drive on the particular 
sSATA port.

• 

Model number of drive and capacity

• 

Software Preserve Support 

Port 2/4/5 Hot Plug

Set this feature to Enable for hot plug support, which will allow the user to replace a SATA 
drive without shutting down the system. The options are Disable and 

Enable

.

Port 2/4/5 Spin Up Device

Set this feature to enable or disable the PCH to initialize the device. The options are 

Disable

 and Enable.

Port 2/4/5 sSATA Device Type

Use this feature to specify if the SATA port specified by the user should be connected to a 

Solid State Drive or a Hard Disk Drive. The options are 

Hard Disk Drive

 and Solid State 

Drive.

Содержание SuperServer 1019D-12C-FRN5TP

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды