Supermicro SUPERSERVER 1018R-WR, Руководство пользователя

Страница: 44 / 75

6-3 6-2
Chapter 6: Advanced Chassis Setup
S
UPER
S
ERVER 1018R-WR User's Manual
6-2 Removing Power from the System
Before performing setup or maintenance tasks, use the following procedure to
ensure that power has been removed from the system.
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply. Remove the
cords from both power supply modules.
3. Disconnect the cords from the power strip or wall outlet.
6-3 Removing the Chassis Cover
You may need to remove the top cover to access the inside of the system for some
of the procedures desccibed in this chapter.
Removing the Chassis Cover:
1. Remove the thumb screw securing the top cover to the chassis.
2. Remove the two screws on the sides of the chassis.
3. Lift the cover up and off of the chassis.
Figure 6-2. Removing the Chassis Cover
Thumb screw
Figure 6-1. SC514-R407W Chassis Front and Rear Views
Rear I/O Ports PCI Slots
Control Panel