Supermicro Supero 6016T-6F Скачать руководство пользователя страница 94

Страница: 94 / 122

7-10

UPER

ERVER 6016T-6F User's Manual

Crystal Beach/DMA (Direct Memory Access)

This feature works in conjunction with the Intel I/O AT (Acceleration Technology)

to accelerate the performance of TOE devices. (

Note

: A TOE device is a special-

ized, dedicated processor that is installed on an add-on card or a network card to

handle some or all packet processing of this add-on card.) When this feature is set

to Enabled, it will enhance overall system performance by providing direct memory

access for data transferring. The options are Enabled and

Disabled.

Crystal Beach/DCA (Direct Cache Access)

This feature works in conjunction with the Intel I/O AT (Acceleration Technology) to

accelerate the performance of the TOE device. When this feature set to Enabled, it

will enhance overall system performance by providing direct cache access for data

transferring. The options are Enabled and

Disabled.

NUMA Support

Select Enabled to use the feature of Non-Uniform Memory Access to improve CPU

performance. The options are

Enabled

and Disabled.

Payload Size

This feature limits the payload size by enabling (128B) or disabling (256B) coalesce

support. The options are 256B and

128B

Intel VT-d

Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d

by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.

This feature offers fully-protected I/O resource-sharing across the Intel platforms,

providing the user with greater reliability, security and availability in networking and

data-sharing. The settings are Enabled and

Disabled



SouthBridge Confi guration

This feature allows the user to confi gure the settings for the Intel ICH South

Bridge.

USB Functions

Select Enabled to use onboard USB ports. The Options are: Disabled and

Dis-

abled

Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB

support will be automatically enabled when a legacy USB device is installed on the

motherboard. The settings are Disabled, and

Enabled

Содержание Supero 6016T-6F



























































































































Результаты поиска

Содержание Supero 6016T-6F

Отзывы:

Похожие инструкции для Supero 6016T-6F

Бренды по названию

Популярные бренды

Supermicro Supero 6016T-6F, Руководство пользователя

Результаты поиска

Содержание Supero 6016T-6F

Отзывы:

Похожие инструкции для Supero 6016T-6F

Бренды по названию

Популярные бренды