Supermicro Supero 6016T-6F, Руководство пользователя

Страница: 92 / 122

7-8
S
UPER
S
ERVER 6016T-6F User's Manual

Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:

CPU Bridge Confi guration
QPI (Quick_Path Interface) Links Speed
This feature selects QPI's data transfer speed. The options are Slow-mode, and
Full Speed .
QPI Frequency
This selects the desired QPI frequency. The options are Auto , 4.800 GT,
5.866GT, 6.400 GT.
QPI L0s and L1
Select Enabled to lower QPI power state. L0s and L1 are automatically selected
by the motherboard. The options are Disabled and Enabled.
Memory Frequency
This feature forces a DDR3 frequency slower than what the system has detected
to a frequency setting selected by the user. The available options are Auto , Force
DDR-800, Force DDR-1066, Force DDR-1333 and Force SPD.
Memory Mode
The options are Independent , Channel Mirror, and Lockstep.
Independent - All DIMMs are available to the operating system.
Channel Mirror - The motherboard maintains two identical copies of all data in
memory for redundancy.
Lockstep - The motherboard uses two areas of memory to run the same set of
operations in parallel.
Demand Scrubbing
A memory error-correction scheme where the Processor writes corrected data
back into the memory block from where it was read by the Processor. The op-
tions are Enabled and Disabled .
Patrol Scrubbing
A memory error-correction scheme that works in the background looking for and
correcting resident errors. The options are Enabled and Disabled .