manualshive.com logo in svg

Supermicro SC847E1C Series, Руководство пользователя

Поделиться
Скачать
Supermicro SC847E1C Series Скачать руководство пользователя страница 70

C-2

SC847E1C/2C JBOD Chassis Manual

C-3  An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest back-
plane revision available at the time of publishing. The card you have received may 
or may not look exactly the same as the graphics shown in this manual.

C-4  Introduction to the BPN-SAS3-846EL Backplane

The BPN-SAS3-846EL backplane has been designed to utilize the most up-to-date 
technology available, providing your system with reliable, high-quality performance. 

This  manual  reflects  BPN-SAS3-846EL  Revision  1.01,  the  most  current  release 

available at the time of publication. Always refer to the Supermicro Web site at 
www.supermicro.com for the latest updates, compatible parts and supported con-

figurations.

C-5  Overview of the BPN-SAS3-846EL1/EL2 Backplanes

The BPN-SAS3-846EL1 and BPN-SAS3-846EL2 model backplanes are identical, 
except that the BPN-SAS3-846EL2 backplane has duplicate secondary components 
which are not found on the BPN-SAS3-846EL1. The BPN-SAS3-846EL2 is divided 
into a two sections, with the primary components on the right side of the board and 
the secondary components on the left. SAS3 backplanes are not compatible with 
legacy SAS (3 Gbps), SATA (1.5 Gbps) backplanes or lower.

Содержание SC847E1C Series

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды