manualshive.com logo in svg

Supermicro SC847E1C Series, Руководство пользователя

Поделиться
Скачать
Supermicro SC847E1C Series Скачать руководство пользователя страница 44

SC847E1C/2C JBOD Chassis Manual

4-6

Seven hot-swappable, heavy-duty fans provide cooling for the chassis. These fans 
circulate air through the chassis thereby lowering the chassis internal tempera-
ture. 

4-4  System Fans

Replacing a System Fan

1.  Open the chassis while the power is running to determine which fan has 

failed. (Never run the server for an extended period of time with the chassis 
cover open.)

2.  Remove the failed fan's power cord from the serverboard.

3.  Press the fan release tab to lift the failed fan from the chassis and pull it 

completely out of the chassis.

4.  Place the new fan into the vacant space in the housing while making sure the 

arrows on the top of the fan (indicating air direction) point in the same direc-
tion as the arrows on the other fans.

5.  Check that the fan is working properly before replacing the chassis cover.

6.  Plug the power cords into the rear of the power supplies and power up the 

system.

Figure 4-7: System Fan

Release Tab

Air Direction 

Indicator

Содержание SC847E1C Series

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды