manualshive.com logo in svg

Supermicro SC847E1C Series, Руководство пользователя

Поделиться
Скачать
Supermicro SC847E1C Series Скачать руководство пользователя страница 46

SC847E1C/2C JBOD Chassis Manual

4-8

4-5  Power Supply 

The SC847EC1/C2 JBOD chassis has a 1280 Watt high-efficiency redundant power 

supply. This power supply is auto-switching capable. This enables it to automatically 
sense and operate at a 100v to 240v input voltage. An amber light will be illuminated 
on the power supply when the power is off. An illuminated green light indicates that 
the power supply is operating.

Redundant power supplies are hot-swappable, and can be changed without pow-
ering down the system. New units can be ordered directly from Supermicro (see 
contact information in the Preface). 

Changing the Power Supply:

1.  If your chassis includes a redundant power supply (at least two power mod-

ules), you can leave the server running and remove only one power supply. If 
your server has only one power supply, you must power down the server and 
unplug the power cord.

2. Push the release tab (on the back of the power supply) as illustrated.

3. Pull the power supply out using the handle provided.

Figure 4-9: Power Supply Release Tab

Release Tab

Содержание SC847E1C Series

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды