SC826 Chassis Manual
4-18
Depending on your chassis model, the SC826 Chassis has a 800 watt power supply.
This power supply is auto-switching capable. This enables it to automatically sense
and operate at a 100v to 240v input voltage. An amber light will be illuminated on
the power supply when the power is off. An illuminated green light indicates that
the power supply is operating.
4-9 Power Supply
Changing the Power Supply
If your chassis includes a redundant power supply (at least two power mod-
ules), you can leave the server running and remove only one power supply. If
your server has only one power supply, you must power down the server and
unplug the power cord.
Push the release tab (on the back of the power supply) as illustrated.
Pull the power supply out using the handle provided.
Replace the failed power module with the same model.
Push the new power supply module into the power bay until you hear a click.
Plug the AC power cord back into the module and power up the server.
1.
2.
3.
4.
5.
6.
Figure 4-15: Removing the Power Supply
Release Tab
Содержание SC826E1-R800LP
