Supermicro SC818, Руководство пользователя

Страница: 23 / 32

2-11
Chapter 2: Installation Procedures
Section 2:
SCSI (Super) GEM Driver Installation
Instructions for the Windows Operating System
Please refer to the following instructions to install the SCSI GEM Driver
for the Windows operating systems.
(*Note:
This driver is not necessary for other Operating Systems. If you
have two HDD backplanes, you will need to install the driver twice.)
The driver is located on the Super Micro motherboard driver CD or is available for
download from our FTP site:
ftp://ftp.supermicro.com/driver/Qlogic/
Follow the instructions below to install this driver to your system.
Installing the driver:
1) Right click on “My Computer” and choose “Property”.
2) Select “Hardware” tab and click on “Device Manager”.
3) Open “Other Devices” or wherever “GEM318” is on.
4) Right click on this device and choose “Property”.
5) Click on “Driver” tab and choose “Update Driver”.
6) Click “Next” 2 times, uncheck both “Floppy disk drives” and “CD-ROM drives”.
Then, select the item- “Specify a location,” and choose “Next”.
7) Click on “Browse” and choose D drive or wherever Supermicro Setup CD is
in.
8) Choose “Qlogic” folder and click on “Open”.
9) System will automatically detect GEM318 and install the drive from this point
on.
or,
1) Right click the "My Computer" icon on your desktop and choose Properties.
2) Click on the Hardware tab and click on "Device Manager" to bring up the list
of system devices.
3) You may see one or two yellow question marks (?) that read QLogic GEM354
or GEM318 SCSI Processor Device. Right click on these, and choose to
uninstall. If two such question marks are present, uninstall both.
4) Click on Action tab and choose "Scan for Hardware Changes". The Hard-
ware Wizard program should start up. Click "Next".
5) At the fi rst prompt, choose “Display a list of known device drivers for the
device so that I can choose a specifi c driver” and click "Next".
6) Choose “Other Devices” and click Next.
7) Choose “Have Disk”, and specify your fl oppy drive location in the options
box. Then, click "Next".
8) Highlight “Enclosure Services Device” and click "Next".
9) Ignore the warning prompt by clicking "Yes".
(*Note: Please refer to the Appendix for SCA-818S Backplane
Information.)