background image

SC745 Chassis 

Manual

ii

Manual 

Revision 

1.0b 

      

Release Date: November 4, 2014

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.  

The vendor assumes no responsibility for any inaccuracies that may be contained in this document, 

makes no commitment to update or to keep current the information in this manual, or to notify any 

person or organization of the updates.  

Please Note:  For the most up-to-date version of this 

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product 

described in this manual at any time and without notice.  This product, including software and 

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a 

license. Any use or reproduction of this product is not allowed, except as expressly permitted by 

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, 

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO 

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES.  IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY 

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE 

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH 

HARDWARE, 

SOFTWARE, 

OR 

DATA. 

     

         

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa 

Clara County in the State of California, USA.  The State of California, County of Santa Clara shall 

be the exclusive venue for the resolution of any such disputes.  Super Micro's total liability for all 

claims will not exceed the price paid for the hardware product.          

 

 

         

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate 

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate 

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this 

product may expose you to lead, a chemical known to 

the State of California to cause birth defects and other 

reproductive harm. 

Unless you request and receive written permission from Super Micro Computer, Inc., you may not 

copy any part of this document.

Information in this document is subject to change without notice.  Other products and companies 

referred to herein are trademarks or registered trademarks of their respective companies or mark 

holders.

Copyright © 2014 by Super Micro Computer, Inc. 

All rights reserved. 

Printed in the United States of America

Содержание SC745BTQ-R1K28B

































































































Отзывы: