manualshive.com logo in svg

Supermicro MBI-6219G-T, Руководство пользователя

Поделиться
Скачать
Supermicro MBI-6219G-T Скачать руководство пользователя страница 56

MBI-6219G-T MicroBlade Module User’s Manual

6

SATA Configuration

See 

Table 5-6

 for a description of BIOS setup menu options in this 

sub-menu.

Server ME Configuration

See 

Table 5-7

 for a description of BIOS setup menu options in this 

sub-menu.

PCIe/PCI/PnP 

Configuration

See 

Table 5-8

 for a description of BIOS setup menu options in this 

sub-menu.

Super IO Configuration

See 

Table 5-9

 for a description of BIOS setup menu options in this 

sub-menu.

Serial Port Console 

Redirection

See 

Table 5-10

 for a description of BIOS setup menu options in this 

sub-menu.

ACPI Settings

See 

Table 5-11

 for a description of BIOS setup menu options in this 

sub-menu.

Table 5-3. Boot Feature Submenu 

Menu Option

Description

Quiet Boot

Use this feature to select the screen display between the POST messages 
and the OEM logo upon bootup. Select Disabled to display the POST 
messages. Select Enabled to display the OEM logo instead of the normal 
POST messages. The options are 

Enabled 

and Disabled. 

AddOn ROM Display Mode

Use this feature to set the display mode for the Option ROM. Select Keep 
Current to display the current AddOn ROM setting. Select Force BIOS to 
use the Option ROM display set by the system BIOS. The options are 

Force BIOS 

and Keep Current. 

Bootup NumLock State

Use this feature to set the Power-on state for the <Numlock> key. The 
options are Off and 

On

.

Wait for ‘F1’ If Error

Use this feature to force the system to wait until the 'F1' key is pressed if an 
error occurs. The options are Disabled and 

Enabled

. 

INT19 Trap Response

Interrupt 19 is the software interrupt that handles the boot disk function. 
When this item is set to Enabled, the ROM BIOS of the host adaptors will 
"capture" Interrupt 19 at bootup and allow the drives that are attached to 
these host adaptors to function as bootable disks. If this item is set to 
Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, 
and the drives attached to these adaptors will not function as bootable 
devices. The options are 

Immediately 

and Postponed. 

Re-try Boot

This option allows you to decide how to retry boot devices which fail to 
boot. Options include 

Disabled

, Legacy Boot or EFI Boot.

Watch Dog Function

If enabled, the Watch Dog Timer will allow the system to reboot when it is 
inactive for more than 5 minutes. The options are Enabled and 

Disabled. 

Power Button Function

This feature controls how the system shuts down when the power button is 
pressed. Select 4_Seconds_Override for the user to power off the system 
after pressing and holding the power button for 4 seconds or longer. Select 
Instant Off to instantly power off the system as soon as the user presses 
the power button. The options are 4 Seconds Override and 

Instant Off. 

Table 5-2. Advanced Setup Menu Options  (Continued)

Sub-menu

Description

Содержание MBI-6219G-T






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды