manualshive.com logo in svg

Supermicro MBI-6219G-T, Руководство пользователя

Поделиться
Скачать
Supermicro MBI-6219G-T Скачать руководство пользователя страница 62

MBI-6219G-T MicroBlade Module User’s Manual

12

Table 5-6. SATA Configuration Sub-menu 

Menu Option

Description

SATA Controller

This feature allows you to enable or disable the SATA controller. The 
options are 

Enabled 

and Disabled. 

Configure SATA As

Use this setting to configure the SATA as either IDE, RAID or 

AHCI

 

options.

SATA Frozen

This setting enables/disables the Freeze Lock Security feature. The 
options are Enabled

 

and 

Disabled

.

SATA AHCI LPM

This setting enables/disables Link Power Management. The options are 

Enabled 

and Disabled. 

Support Aggressive Link 
Power Mgmt

Using this feature, the SATA controller supports auto-generating link 
requests to the partial or slumber states when there are no commands to 
process. The options are 

Enabled 

and Disabled. 

SATA0/SATA1/SATA2/
SATA3/SATA4 Port Hot 
Plug

This feature designates this port for hot plugging. Set this item to Enabled 
for hot-plugging support, which will allow the user to replace a SATA drive 
without shutting down the system. The options are 

Enabled 

and Disabled.

SATA0/SATA1/SATA2/
SATA3/SATA4 Port Spin Up 
Device

If enabled for any of the ports Staggered Spin Up will be performed and 
only the drives which have this option enabled will spin up at boot. 
Otherwise (if disabled) all drives will spin up at boot. The options for this 
setting are Enabled and 

Disabled

.

SATA0/SATA1/SATA2/
SATA3/SATA4 Port SATA 
Device Type

This setting allows you to specify the selected port SATA device as being 
either a 

Hard Disk Drive

 or Solid State Drive.

Table 5-7. Server ME Configuration Sub-menu

Menu Option

Description

General ME Configuration 
Information

This submenu displays static General ME Configuration information. This 
includes Operational Firmware Version, ME Firmware Type, Recover 
Firmware Version, ME Firmware Features, ME Firmware Status #1/#2, 
Current State and Error Code. All this information is a static displayed and 
cannot be configured.

Table 5-8. PCIe/PCI/PnP Configuration Sub-menu 

Menu Option

Description

PCI Bus Driver Version

This displays the PCI Bus Driver Version for your system.

PCI PERR/SERR Support

Use this system to specify PCI PERR/SERR as enabled/disabled. The 
options are Enabled

 

and 

Disabled

.

SR-IOV Support

If the system has SR-IOV capable PCIe Devices, this option enables or 
disables Single Root IO Virtualization Support. The options are Enabled

 

and 

Disabled

.

Maximum Payload 

This setting allows you to set the maximum payload of the PCI Express 
device or you can select Auto to allow the system BIOS to automatically 
set the maximum payload value for a PCI-E device to enhance system 
performance. The options are 

Auto

, 128 Bytes, 256 Bytes, 512 Bytes, 

1024 Bytes, 2048 Bytes, and 4096 Bytes. 

Содержание MBI-6219G-T






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды